Development of Next‐Generation Organic‐Based Solar Cells: Studies on Dye‐Sensitized and Perovskite Solar Cells

Next‐generation organic solar cells such as dye‐sensitized solar cells (DSSCs) and perovskite solar cells (PSCs) are studied at the National Institute of Advanced Industrial Science and Technology (AIST), and their materials, electronic properties, and fabrication processes are investigated. To enhance the performance of DSSCs, the basic structure of an electron donor, π‐electron linker, and electron acceptor, i.e., D–π–A, is suggested. In addition, special organic dyes containing coumarin, carbazole, and triphenylamine electron donor groups are synthesized to find an effective dye structure that avoids charge recombination at electrode surfaces. Meanwhile, PSCs are manufactured using both a coating method and a laser deposition technique. The results of interfacial studies demonstrate that the level of the conduction band edge (CBE) of a compact TiO₂ layer is shifted after TiCl₄ treatment, which strongly affects the solar cell performance. Furthermore, a special laser deposition system is developed for the fabrication of the perovskite layers of PSCs, which facilitates the control over the deposition rate of methyl ammonium iodide used as their precursor.     

High‐Voltage Photogeneration Exclusively via Aggregation‐Induced Triplet States in a Heavy‐Atom‐Free Nonplanar Organic Semiconductor

The electron–hole recombination kinetics of organic photovoltaics (OPVs) are known to be sensitive to the relative energies of triplet and charge‐transfer (CT) states. Yet, the role of exciton spin in systems having CT states above 1.7 eV—like those in near‐ultraviolet‐harvesting OPVs—has largely not been investigated. Here, aggregation‐induced room‐temperature intersystem crossing (ISC) to facilitate exciton harvesting in OPVs having CT states as high as 2.3 eV and open‐circuit voltages exceeding 1.6 V is reported. Triplet excimers from energy‐band splitting result in ultrafast CT and charge separation with nonradiative energy losses of <250 meV, suggesting that a 0.1 eV driving force is sufficient for charge separation, with entropic gain via CT state delocalization being the main driver for exciton dissociation and generation of free charges. This finding can inform engineering of next‐generation active materials and films for near‐ultraviolet OPVs with open‐circuit voltages exceeding 2 V. Contrary to general belief, this work reveals that exclusive and efficient ISC need not require heavy‐atom‐containing active materials. Molecular aggregation through thin‐film processing provides an alternative route to accessing 100% triplet states on photoexcitation.     

Metal–Organic Frameworks for Energy

Serious environmental problems, growing demand for energy, and the pursuit of environmental‐friendly, sustainable, and effective energy technologies to store and transform clean energy have all drawn great attention recently. As a part of the special issue “Energy Research in National Institute of Advanced Industrial Science and Technology (AIST)” this review systematically summarizes the research progress of metal–organic framework (MOF) composites and derivatives in energy applications, including catalytic CO oxidation, liquid‐phase chemical hydrogen storage, and electrochemical energy storage and conversion. Furthermore, the correlation between MOF‐based structures, synthetic strategies, and their corresponding performances is carefully discussed. The further scope and opportunities, expected improvements and challenges are also discussed. This review will not only benefit development of more feasible protocols to fabricate nanostructures for energy systems but also stimulate further interest in MOF composites and derivatives, for energy applications.     

Single‐Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications

Emerging solar cells, namely, organic solar cells and perovskite solar cells, are the thin‐film photovoltaics that have light to electricity conversion efficiencies close to that of silicon solar cells while possessing advantages in having additional functionalities, facile‐processability, and low fabrication cost. To maximize these advantages, the electrode components must be replaced by materials that are more flexible and cost‐effective. Researchers around the globe have been looking for the new electrodes that meet these requirements. Among many candidates, single‐walled carbon nanotubes have demonstrated their feasibility as the new alternative to conventional electrodes, such as indium tin oxide and metals. This review discusses various growth methods of single‐walled carbon nanotubes and their electrode applications in thin‐film photovoltaics.     

Bringing Conducting Polymers to High Order: Toward Conductivities beyond 105 S cm−1 and Thermoelectric Power Factors of 2 mW m−1 K−2

Here, an effective design strategy of polymer thermoelectric materials based on structural control in doped polymer semiconductors is presented. The strategy is illustrated for two archetypical polythiophenes, e.g., poly(2,5‐bis(3‐dodecyl‐2‐thienyl)thieno[3,2‐b]thiophene) (C₁₂‐PBTTT) and regioregular poly(3‐hexylthiophene) (P3HT). FeCl₃ doping of aligned films results in charge conductivities up to 2 × 10⁵ S cm^?1 and metallic‐like thermopowers similar to iodine‐doped polyacetylene. The films are almost optically transparent and show strongly polarized near‐infrared polaronic bands (dichroic ratio >10). The comparative study of structure–property correlations in P3HT and C₁₂‐PBTTT identifies three conditions to obtain conductivities beyond 10⁵ S cm^?1: i) achieve high in‐plane orientation of conjugated polymers with high persistence length; ii) ensure uniform chain oxidation of the polymer backbones by regular intercalation of dopant molecules in the polymer structure without disrupting alignment of π‐stacked layers; and iii) maintain a percolating nanomorphology along the chain direction. The highly anisotropic conducting polymer films are ideal model systems to investigate the correlations between thermopower S and charge conductivity σ. A scaling law S ∝ σ^?1/4 prevails along the chain direction, but a different S ∝ ?ln(σ) relation is observed perpendicular to the chains, suggesting different charge transport mechanisms. The simultaneous increase of charge conductivity and thermopower along the chain direction results in a substantial improvement of thermoelectric power factors up to 2 mW m^?1 K^?2 in C₁₂‐PBTTT.     

Slot‐Die and Roll‐to‐Roll Processed Single Junction Organic Photovoltaic Cells with the Highest Efficiency

The record efficiency of the state‐of‐the‐art polymer solar cells (PSCs) is rapidly increasing, due to the discovery of high‐performance photoactive donor and acceptor materials. However, strong questions remain as to whether such high‐efficiency PSCs can be produced by scalable processes. This paper reports a high power conversion efficiency (PCE) of 13.5% achieved with single‐junction ternary PSCs based on PTB7‐Th, PC₇₁BM, and COi8DFIC fabricated by slot‐die coating, which shows the highest PCE ever reported in PSCs fabricated by a scalable process. To understand the origin of the high performance of the slot‐die coated device, slot‐die coated photoactive films and devices are systematically investigated. These results indicate that the good performance of the slot‐die PSCs can be due to a favorable molecule‐structure and film‐morphology change by introducing 1,8‐diiodooctane and heat treatment, which can lead to improved charge transport with reduced carrier recombination. The optimized condition is then used for the fabrication of large‐area modules and also for roll‐to‐roll fabrication. The slot‐die coated module with 30 cm² active‐area and roll‐to‐roll produced flexible PSC has shown 8.6% and 9.6%, respectively. These efficiencies are the highest in each category and demonstrate the strong potential of the slot‐die coated ternary system for commercial applications.     

不同施肥处理对柑橘粉虱和柑橘潜叶蛾发生的影响

柑橘粉虱Dialeurodes citri Ashmead和柑橘潜叶蛾Phyllocnistis citrella Stainton是柑橘的主要害虫,为了评估施肥对其发生的影响,本研究调查了施用有机肥、化肥、复混肥(有机肥与化肥混合)的砂糖橘苗木上这两种害虫的发生危害情况。结果表明,施用有机肥的苗木上柑橘粉虱的卵和若虫数量显著低于化肥,由柑橘粉虱诱发的煤污病发病程度也显著低于化肥处理。有机肥处理柑橘粉虱成虫数量也最少,但与化肥、复混肥差异未达显著水平。另外,柑橘潜叶蛾为害情况在3种肥料处理之间则没有显著差异。说明施有机肥的砂糖橘对柑桔粉虱的吸引作用最弱,其次为复混肥,化肥最吸引柑橘粉虱。3种施肥处理对柑橘潜叶蛾的吸引作用差异不明显。     

Standardized total tract digestible phosphorus requirement of 6 to 13 kg pigs fed diets without or with phytase

Dietary phosphorus concentration greatly affects pig’s growth performance, environmental impact and diet cost. A total of 1080 pigs (initially 5.9 ± 1.08 kg) from three commercial research rooms were used to determine the effects of increasing standardized total tract digestible (STTD) P concentrations in diets without and with phytase on growth performance and percentage bone ash. Pens (10 pigs/pen, 9 pens/treatment) were balanced for equal weights and randomly allotted to 12 treatments. Treatments were arranged in two dose titrations (without or with 2000 units of phytase) with six levels of STTD P each. The STTD P levels were expressed as a percentage of NRC (2012) requirement estimates (% of NRC; 0.45 and 0.40% for phases 1 and 2, respectively) and were: 80%, 90%, 100%, 110%, 125% and 140% of NRC in diets without phytase and 100%, 110%, 125%, 140%, 155% and 170% of NRC in diets with phytase. Diets were provided in three phases, with experimental diets fed during phases 1 (days 0 to 11) and 2 (days 11 to 25), followed by a common diet from days 25 to 46. On day 25, radius samples from one median-weight gilt per pen were collected for analysis of bone ash. During the treatment period, increasing STTD P from 80% to 140% of NRC in diets without phytase improved average daily gain (ADG; quadratic, P < 0.01), average daily feed intake (ADFI; quadratic, P < 0.05) and gain–feed ratio (G : F; linear, P < 0.01). Estimated STTD P requirement in diets without phytase was 117% and 91% of NRC for maximum ADG according to quadratic polynomial (QP) and broken-line linear (BLL) models, respectively, and was 102%, 119% and >140% of NRC for maximum G : F using BLL, broken-line quadratic and linear models, respectively. When diets contained phytase, increasing STTD P from 100% to 170% of NRC improved ADG (quadratic, P < 0.05) and G : F (linear, P < 0.01). Estimated STTD P requirement in diets containing phytase was 138% for maximum ADG (QP), and 147% (QP) and 116% (BLL) of NRC for maximum G : F. Increasing STTD P increased (linear, P < 0.01) the percentage bone ash regardless of phytase addition. When comparing diets containing the same STTD P levels, phytase increased (P < 0.01) ADG, ADFI and G : F. In summary, estimated STTD P requirements varied depending on the response criteria and statistical models and ranged from 91% to >140% of NRC (0.41% to >0.63% of phase 1 diet and 0.36% to >0.56% of phase 2 diet) in diets without phytase, and from 116% to >170% of NRC (0.52% to >0.77% of phase 1 diet and 0.46% to >0.68% of phase 2 diet) for diets containing phytase. Phytase exerted an extra-phosphoric effect on promoting pig’s growth and improved the P dose-responses for ADG and G : F.     

Improving phosphorus sustainability of sugarcane production in Brazil

Phosphorus (P) use in global food and bioenergy production needs to become more efficient and sustainable to reduce environmental impacts and conserve a finite and critical resource (Carpenter & Bennett, Environmental Research Letters, 2011, 6, 014009; Springmann et al., Nature, 2018, 562, 519). Sugarcane is one crop with a large P footprint because production is centered on P‐fixing soils with low P availability (Roy et al., Nature Plants, 2016, 2, 16043; Withers et al., Scientific Reports, 2018, 8, 2537). As global demand for processed sugar and bioethanol continues to increase, we advocate that improving P efficiency could become a key sustainability goal for the sugarcane industry. Here, we applied the 5R global P stewardship framework (Withers et al., Ambio, 2015, 44, 193) to identify more sustainable options to manage P in Brazilian sugarcane production. We show that current inputs of P fertilizer to the current crop area could be reduced by over 305 Gg, or 63%, over the next three decades by reducing unnecessary P fertilizer use, better utilization of recyclable bioresources and redesigning recommendation systems. Adoption of these 5R options would save the sugarcane industry in Brazil 528 US$ million and help safeguard global food and energy security.